This is my first prototype for a B9 Endoskeleton.
When finished it will have another large ring above the arm area and a smaller ring at the top of the torso for Collar attachment.
Note: the 2 front uprights in the assembled photos below had to be removed-I forgot about the arm sockets in the torso!
With a slight workaround this can be solved.
The parts
Assembled
Note the nuts embedded in the frame. This is a cross section; when the other half joins it, the nuts are in the center of the struts & rings-completely unseen!
Screws can be put in from the top or bottom!
In the torso
Shot through the neon opening
Shot from the top
Through the arm opening
Through the vent openings
[Home]